Advanced engineered polymer body, completely translucent and impact resistant. Round count markers. Hardened steel feed lips, PTFE coated for corrosion resistance. Rubber coated bottom, easy to remove. Constant curve internal geometry with a customized follower. Smoke colored.

Now you can easily attach your Surefire light to your rifles Picatinny rails! This mounting ring fits the 6P/G2 Nitrolon as well as other 1” body diameter lights. It features a self adjusting clamp and allows you to remove the light from the weapon without having to remove the mount. Black. See Surefire Lights on pages 64 & 65.

Similar to our popular G2 Nitrolon but a slightly stronger, more powerful three battery version. Puts out a smooth, pre-focused tactical-level beam with five times the light of a big two D Cell flashlight-bright enough to temporarily blind and disorient an attacker by impairing his night adapted vision. Output of the G3 is 105 lumens. Use our optional ultra high output P91 lamp assembly (Item # FR234) to increase light output to 200 lumens! Only available in black.

Now you can easily attach your Surefire light to your rifles Picatinny rails! This mounting ring fits the 6P/G2 Nitrolon as well as other 1” body diameter lights. It features a self adjusting clamp and allows you to remove the light from the weapon without having to remove the mount. Black. See Surefire Lights on pages 64 & 65.

Gives you an intense 200 lumens of white light with a 20 minute runtime. Fits in spars carrier (Item # FR355) for field deployment. For the 9P, G3, C3, D3 and Z3.

Now you have a choice of momentary or constant-on light activation without having to rotate the tailcap of your light. Push lightly on the tailcap for momentary activation, push harder to “click” the light into constant-on mode, click again for off.Fits the following SureFire flashlights: 6P, 9P, C2, C3, G2, G2Z, Z2.

One of the hardest parts to clean on the AR15 is the space at the back of the carrier. Not only are the carbon deposits difficult to remove but they’re also difficult to reach. Our carbon scraper has a screwdriver type handle and features four sharp cutting edges to make quick work of the chore! (Not Available At This Time)

The UpLULA simply slides over the pistol magazine and uses a metal tongue to depress the top round, allowing the next round to drop into the magazine effortlessly! One size fits all. Loads most 9mm, .357, .40 and .45 rounds and mags. Fits single and double-stack mags of most manufacturers including: Astra, Auto Ordinance, Beretta. Browning, Bul, Colt, CZ, EEA, FN, Glock, HK, Hi-Point, High Standard, Kahr, Kel-Tec, Kimber, Les Baer, Llama, Luger, Magnum Research, Para Ordinance, Phoenix Arms, Ruger, Sigma, Sig /Sauer, S&W, Springfield Armory, Star, Steyr, STI Int., Taurus, Vector, Walter, Wilson Combat and more. Note: Will not fit Glock 36 Features: Eliminates thumb pain and injury • Indifferent to magazine length • Eliminates wear on feed lips • Prolong magazine life •Reliable in all weather •Durable reinforced polymer •One round per sec. loading •Ambidextrous

Compact high-intensity incandescent flashlight for tactical, self-defense, and general use, similar to our G2 but a slightly longer, more powerful three-battery version. Puts out a smooth, brilliant, pre-focused tactical-level beam with five times the light of a big two-D-cell flashlight - bright enough to temporarily blind and disorient an attacker by impairing his night-adapted vision. Light output may be nearly doubled with optional P91 lamp.FEATURES * Rugged, lightweight, corrosion-proof Nitrolon polymer body, available in black * Tempered Pyrex® window * O-ring sealed, weatherproof * Tailcap switch: press for momentary-on, twist for constant-on * Switch lockout prevents accidental activation during transport or storage

This Revolutionary Accessory enables you to carry a spare mag, ready to use, on your weapon. This grip serves as a spare mag carrier, but also as a unique ergonomic fore grip. Features: Quick Release button - just slide the grip onto the rail. • Backup Locking Screw - Should you decide to lock it in place when not using the quick release mechanism. • Magazine release button - similar to the AR15/M16 one - to quickly release the magazine. • Can be used as an ergonomic foregrip even without the magazine inside.

Easily mount any 1” diameter light (such as Surefire 6P, 9P or G2 Nitrolon) to any Picatinny or Weaver rail system. Puts the light at the optimal position for tailcap activation with the offhand thumb.

Attaching your 1” diameter light to your rifle’s rail system has never been easier! Our machined aluminum mount features a large thumb screw that allows you to mount your flashlight in mere seconds. It fits all Picatinny and Weaver style rails and accepts all flashlights with a 1” diameter body. Some of the lights it fits are: Surefire G2 Nitrolon, 6P, 9P and many more! Color is flat black.

Picatinny and Weaver Mount compatible.

Picatinny and Weaver Mount compatible.

Picatinny and Weaver Mount compatible.

Picatinny and Weaver Mount compatible.

Locking detent with stepped down turns provide a surface you can grab onto in all conditions. A2 style dual aperture is fully protected with thick pivot ears. Made from 6061 aluminum and hard coat anodized. Picatinny and Weaver Mount compatible.

Fits all AR15/M4 .223 rifles. Includes grip plug and gapper insert.
•Rubber overmolded
•Smooth, textured finger grooves.
•Integral rear upper extension supports the hands web
•Better weapon control, even when wearing gloves.
•Black only

Provides two rails positioned at 45o (will not interfere with iron sights) and one removable center rail. Excellent for bipods and light/laser mounts. Product Features: Two 2.5” Picatinny side rails, one 3” center rail •45o position allows for ease of flashlight operation while simultaneously holding grip •High density polymer construction •Quickly mounts on upper or lower existing handguard •Majority of handguard is left free to provide a secure grip •Fits standard handguards •No gunsmithing required

Securely mounts to the front sight providing two rails for laser and light equipment to be mounted. Features: •2.5” 4 position Picatinny rail on each side •High density polymer construction •Easy to fit/remove and secured by Allen bolts •No gunsmithing required

The 30th Edition is expanded to nearly 2,300 pages including a revised 80-page color Photo Percentage Grading System to help accurately grade every firearm’s condition factor. Pricing is updated for 2009, along with detailed information on thousands of modern and antique firearms including the red hot paramilitary-style guns, and new 2009 domestic and imported makes and models. Serialization charts/tables and production data have also been updated. With over 1.3 million books in circulation around the world, the Blue Book of Gun Values is the industry standard for firearm information and values.

The idea of preparedness is spreading rapidly among those waking up to the reality of today’s chaotic economic, geologic, political and environmental climate. There are many reference books available that deal with specific areas of preparedness for an uncertain future. That’s the problem. There are too many books. Most of us are busy, and reading time is precious, this is why “Basic Preparedness” was written. Save TIME and MONEY preparing with “Basic Preparedness”. 8.5” x 11”, indexed, softcover, illustrated, 199 pages.

This volume not only explains how well the rifle performs in testing, but also provides projects gunsmiths can complete to enhance rifle performance. Packed with 600 detailed photos, including step-by-step instructions for projects and a primer on aftermarket parts, this guide delivers honest test results for the rifle, its accuracy, magazines and commonly available ammo. Whether readers are competition shooters, law enforcement personnel, gunsmiths or collectors, there's something in this book for every fan of the AR-15. Author: Patrick Sweeney. 8.5" x 11", 288 pages, photos.

This book goes far beyond the military manuals in depth and scope, using words and over 600 pictures to clearly guide you through every operation required to support your M14/M1A®. You’ll learn the best and easiest ways to enhance, disassemble and assemble your rifle. It won’t make you an M14/M1A® armorer, but it will make you a knowledgeable owner. You’ll be able to do more with (and to) your rifle. You’ll also be able to better judge the competence of those you choose to work on your rifle, and to discuss your needs more intelligently with them. In short, you’ll know your M14/M1A® inside and out. Also included are instructions for installing National Match rear sights, a tutorial on tuning your trigger to National Match standards, a discussion of John Garand’s contributions to the M14, and several 21st Century enhancements. The M14 Complete Assembly guide is 6” x 9”, is Perfect bound laminated soft cover, and has 250 pages and over 600 photographs.

This guide goes beyond the military manuals in depth and scope, using words and pictures to clearly guide the reader through every operation required to assemble their AR-15-type rifle. You'll learn the best and easiest ways to build your rifle. It won't make you an AR-15 armorer, but it will make you a more knowledgeable owner. You'll be able to do more with (and to) your rifle. You'll also be able to better judge the competence of those whom you choose to work on your rifle, and to discuss your needs more intelligently with them. In short, if you build it, you'll know how to repair it. It's the most comprehensive book of its kind on the AR-15. 6" x 9", 164 pages, 331 photographs.

The new second printing of the "M1 Carbine Owner's Guide" by Larry Ruth and Scott Duff is now available. It's a comprehensive look at one of the most popular US Service Rifles of the 20th Century: the M1 Carbine. "How do I evaluate and select an M1 Carbine?" "How do I determine the date of my Carbine's Manufacture?" These are the questions most often asked by new Carbine enthusiasts. They are answered in "The M1 Carbine Owner's Guide." Along with the detailed history, evaluation, assembly, disassembly, operating and maintenance information expected from Scott Duff Publications' Owner's Guides, the "M1 Carbine Owner's Guide" includes never-before published serial number date tables. Carbine Dating, as it were (sorry, couldn't resist the pun!). The "M1 Carbine Owner's Guide" has 106 photographs and drawings in its 144 pages. This book is a unique resource that every Carbine owner and/or aficionado should have!! 6" x 9", illustrated, 144 pages.

The first thing that the reader must know about this book is that it is a gun book. It is not simply war stories, but sixty-five interviews with soldiers and Marines specifically relating their experiences with the US infantry weapons in combat during World War II and in the Korean War. The differing opinions of these men is fascinating. One man loved the M1 rifle and hated the M1 carbine while the next loved the M1 carbine and hated the M1 rifle. Based upon his personal experiences each man had his own opinion on the weapons that he had used during these wars and relates those observations to the reader. So much of what we collectors and history buffs think we know about the use of US infantry weapons in combat has been derived from two sources: movies and books. Some movies, like Band of Brothers are very accurate, others are not. The general history books of these wars rarely contain the in-depth details of infantry weapons that would be of interest to collectors. The stories about US infantry weapons contained in this book are the real hands-on experiences of the men who actually used them for their intended purposes. Once I began reading these interviews, I could not put the manuscript down. 5.5 x 8.5 , 235 pages, photos, softcover.

History, development, selecting the rifle, disassembly, assembly, inspection, cleaning, zeroing, match conditioning, and much, much more. All copies are signed by Scott Duff! The M14/M1ATM has dominated service rifle competition for over 30 years. Prior to publication of this book, no single document existed which described in detail selecting a rifle, operation, troubleshooting, disassembly/assembly, inspection, maintenance, cleaning, and zeroing the M14. The M14 Owner's Guide also traces the history and development from the T44 through adoption and production of the M14 rifle. Evolution of the sniper rifle variations are chronicled. History of the military National Match rifle and the introduction and manufacture of the civilian M14/M1ATM rifles are described. The Match Conditioning Instructions guide the reader through the activities required to convert the M14/M1ATM into a first-class target rifle. Numerous drawings and photographs aid in completion of this procedure. A comprehensive appendix provides the reader with names, addresses, and phone numbers of reputable gunsmiths and suppliers of parts, tools, accessories and books. The book is authored by recognized M1 authority Scott A. Duff and MTU armorer CWO John M. Miller. Nationally recognized military armorers, gunsmiths, manufacturers, suppliers and service rifle competitors assisted in preparation of this book. 6" x 9", illustrated, 176 pages.

How to build your own M1 Garand by Walt Kuleck with Clint McKee. Since the publication of Scott Duff's The M1 Garand Owner's Guide, readers have asked for a book that would help guide them through the assembly of their M1 Garand. Ideally, such a book would impart the tips, tricks, pitfalls and "gotchas!" that experienced Garand enthusiasts and armorers have discovered and developed over the years. This is that book. It goes beyond the military manuals in depth and scope, using words and pictures to clearly guide the reader through every operation required to assemble their Garand. You'll learn the best and easiest ways to build your rifle. It won't make you an Garand armorer, but it will make you a more knowledgeable owner. You'll be able to do more with (and to) your rifle. You'll also be able to better judge the competence of those whom you choose to work on your rifle, and to discuss your needs more intelligently with them. In short, if you build it, you'll know how to repair it. The M1 Garand Complete Assembly Guide has 161 pages and over 350 photographs. 6" x 9", illustrated.

In any field, certain books are recognized as classics. Serious riflemen/experimenters have for two decades placed Hatcher’s Notebook in this category. This extensive work is probably the most useful single volume available to riflemen. Originally compiled to bring together in one usable reference place all the experience, experiments, and detail a lifetime with guns of all kinds, Hatcher’s Notebook unceasingly provides shooters, collectors, gunsmiths, handloaders, ballisticians, hunters with hundreds of technical observations that can effectively aid their special interests. Beginning with scientific histories of the still popular .03 Springfield and .17 Enfield, General Hatcher’s notes speak authoritatively about the development of automatic and semi-automatic weapons and how they work, barrels and experiments with obstruction, strengths and weaknesses of military rifles, receiver steels and heat treatment, headspace, recoil problems and what to do, gunpowder, corrosion, triggers and the Pederson Device. Hardcover, 646 pages, 6”x 9”, photos, illustrated.

My new novel begins five years after the end of Enemies Foreign And Domestic, in a much darker America, which is becoming more of a police state following each new act of terrorism. The national economy is on the brink of total collapse, inflation and unemployment are soaring, and the cities are descending into ungovernable sinkholes of anarchy and ethnic violence. After decades of uncontrolled illegal immigration, tens of millions of undocumented Hispanic aliens have received amnesty, and both political parties are pandering to the desires of these new Spanish-speaking instant-citizens. The action in Domestic Enemies takes place between Oklahoma and California, but much of it occurs in New Mexico. After many years of an open-door policy to illegals and lax "motor-voter" registration, the state government has been taken over (in rigged elections) by extremists, who are only nominally members of the Democratic Party. The federal government, which is dealing with multiple crises it considers far more urgent, turns a blind eye to the ethnic and political turmoil in the "backwater" border state. Thus the stage is set for a bloody showdown between New Mexico ranchers who refuse to leave their ancestral lands, and the Milicia de Nuevo Mexico, which is comprised largely of former illegal alien immigrants, fighting for free land to be distributed as the spoils of victory. Could this really happen? Or has it already begun? Buy this amazing novel and find out for yourself. 539 pages, softcover, 6” x 9”.

Command Arms 2” Picatinny rail fits plain barrel sizes up to and including 12 gauge. Securely mounts vertical grips, bipods, lasers or lighting systems.It will accept most common mounting rings and platforms for mounting flashlights. It will also accept weapon lights such as Streamlights TLR1, TLR2, M3,M6 and Surefires X200/X300 weaponlights. Easy to fit/remove, secured by tightening 4 allen head screws. CNC machined from aviation grade aluminum. Lifetime warranty.

Surefires best selling, high-intensity 6P is now available in the virtually indestructible LED format. With no filament to break or burn out, the 6P LED delivers 80 lumens of white light for 11 hours on a single pair of 123A lithium batteries (included). Perfect for self-defense or disaster preparedness kits. Black. Length: 5.09” Weight: 5.2 ounces.

Leading reference for American firearms, with a multi-generational following. Combines thorough historical arms details and authoritative pricing in one easy-to-use book. The book simply known Flayderman's is your go-to guide for accurate and updated collector pricing, and identifying the historic details of antique firearms. With meticulously researched data, descriptions of stampings and markings for 4,000+ American firearms manufactured between the colonial era and 1900, and more than 1,900 sharp photos-including a new 16 page color photo gallery, Flayderman's is truly the the ultimate value guide to antique American firearms. 752 pages, softcover, 8.5" x 11", illustrated.

Smaller than a matchbox and weighing 1.0 ounces, the Uni-Max Red Laser is the most advanced rail-mounted laser made. It features a integral rail that allows you to stack other rail-mounted gear such as a tactical light or infra-red laser to the Uni-Max laser. Small enough for use on compact pistols, it is also rugged enough to be used on any Picatinny rail platform, including rifles and shotguns. The low profile housing puts the laser as close to the barrel as possible for maximum accuracy. The system is easily windage and elevation zeroed and will maintain zero through repeated fire. Activation switch is ambidextrous. 3 year warranty. Battery: 357 silver oxide, 3.5 hours. Wavelength: 635nm. Power Output: 5mW.

This 2.25” polymer rail attaches to most collapsible stocks and provides a secure mounting point for the Adjustable cheekpiece (# FM77). Installs easily without modifications. Stock not included.

Transform your classic SKS into a modern tactical weapon. Our Fusion System replaces all original stock components with lightweight composite parts. With 6 adjustable positions, this stock will accomodate most sized shooters. It includes a handguard with built-in Picatinny rail that doesn’t interfere with iron sights. The SAW style pistol grip has a more ergonomic angle and increased width for comfort & control and has a storage compartment inside. Works on all SKS models including the “D” model. This stock allows you to enhance the features and look of your current SKS without sacrificing the bayonet. Color: Black, does not include magazine or barreled action. Length of pull: 11.5” collapsed, 15” fully opened. Lifetime guarantee! This item is marked as “TAPCO USA” and counts as 3 U.S. Sec 922R compliant parts. Bipods will only mount on stocks that are NOT cut for bayonets.

Tapco’s 10/22 Fusion Rifle System brings military proven technology to one of America’s favorite rifles. Easily installed on your rifle, this stock offers an upgraded look with improved ergonomics and capabilities. The 6 position stock allows the rifle to adjust to most sized shooters for a tailored fit. The SAW style pistol grip offers greater comfort and control plus an internal storage compartment. Concealed beneath a removable cover, the forearm features a Picatinny rail capable of mounting forward grips and bipods. The included top cover is equipped with an integrated rail designed to accept Weaver/Picatinny style scope rings. Front and rear sling attachment points are included. We have included two models of receiver extensions. The straight extension is preferred by offering a perfectly aligned cheek weld when shooting with optics. The angled extension enables use of the iron sights. Molded of military grade black composite material. Fits standard barrels only. Will not work with 10/22 Magnum. Action and magazine not included.

Lyman's new 49th Edition Reloading Handbook is the latest version of their extremely popular rifle and pistol manual. The 49th Edition covers all popular new rifle calibers such as the 204 Ruger, 6.8 Rem SPC, 325 WSM, 338 Federal, 375 Ruger, 405 Winchester and the WSSM series. In addition, new pistol calibers such as the 5.7x28mm, and 460 S&W are also included. A wide selection of powders are included covering Alliant, Accurate, Hodgdon, Ramshot, VihtaVuori, and Winchester. Additionally, most popular bullet brands are also used including Barnes, Hornady, Nosler, Sierra, Speer, and Swift. As always, full coverage is also given to Lyman cast bullets throughout the handbook. This is the one handbook that should find a home on all reloading benches. Softcover, 8.5" x 11", 464 pages, photos.

This 1 5/8” sling swivel has a push button design for quick detachment. Fits CAA AR-15 stock (#FM68) and CAA AK-47 stocks (#FM81,FM83).

This fully adjustable cheekpiece is designed to fit the Picatinny rail system of Command Arms collapsible stocks (# FM68, FM81, FM83). Quick-adjust knob allows for height adjustmnet and the cheekpiece allows for proper eye relief by moving horizontally along the rail system. If you don’t use the CAA stock (# FM68) but instead have the standard M-4 style buttstock you can use the cheekpiece in conjunction with our Picatinny Rail Adapter (# FM79). Black polymer.

Master Gunsmith Larry Crow shows you the latest modifications you can make to your AR-15 to make it extremely accurate. You’ll see information regarding triggers, grips, sights, barrels, firing pins, gas systems and more, all designed to help you increase the accuracy of your AR-15. Plus, you see an in-depth discussion of high-end rifle scopes and how to use them for shooting out to 600 and 800 yards. This program is professionally produced by Lenny Magill, the world leader in firearm video instruction.