|
7 Shot Magazine Extension
This heavy duty steel extension fits 18" or longer barrels without gunsmithing by replacing the magazine cap. Integral with the unit is a bottom or left side sling mount. Also includes long spring and high visibility shell follower. The finish is non-glare parkerized.
Extension with Left Sling Mount for Remington 870
$59.95 $54.95
|
 |
Multipurpose Tactical Sling |
Without a doubt this is one of the most impressive slings for shotguns and rifles we have used. It is made of 1 1/4 mil-spec nylon webbing and parkerized steel components, which is designed to attach to standard swivels and mounts for weapon transport and engagement. It is capable of several modes of carry such as; standard over the shoulder, hands free over the chest, and in a back pack position. Overall adjustable length is 36"- 48". |
|
• Tactical Sling Mounting Kit (Includes two [2] 1.25" swivels & two [2] stud bases
|
Item # G4018 |
$17.95
$14.95
|
|
|
|
|
|
Shell Follower Only
$6.95
G7101
|
SPEEDFEED I Magazine Tube Stock Set
$0.00
SPEEDFEED I Magazine Tube Stock Set Designed for Law Enforcement * Ideal for Sportsmen The SPEEDFEED I stock has two magazine tubes storing a total of four rounds molded into the stock. Each magazine tube (holding two shells) exits just behind the pistol grip, one on each side of the stock. A steel spring in each tube holds the rounds in the magazine until they're needed and then with a flick of the finger, shells are instantly available for loading. Made from the same polymer formulation used in the Sport Stock series, the SPEEDFEED I won't shrink, swell, or warp due to tough weather conditions. The set comes with ribbed forend & recoil pad.
|
 |
SPEEDFEED III Tactical Magazine Tube Stock Set |
SPEEDFEED III Tactical Magazine Tube Stock Set
After two years of research, development, and prototyping, Speedfeed has produced one of the best tactical shotgun stocks ever ! The pistol grip design gives true one-hand control. With the ability to hold four 12 rounds, the SPEEDFEED III Tactical Stock is truly one of the most versatile stocks on the market today. The set includes forend and recoil pad.
|
|
• Remington 870
|
Item # SF250 |
$110.95
$99.95
|
|
• Remington 1187SF252 Remington 1187
|
Item # SF252 |
$110.95
$99.95
|
|
• Remington 1100
|
Item # SF254 |
$110.95
$99.95
|
|
• Mossberg 500/590
|
Item # SF255 |
$110.95
$99.95
|
|
• Winchester 1200/1300
|
Item # SF259 |
$99.95
|
|
|
|
|
 |
SPEEDFEED Pistol Grip Set |
Designed by the leading supplier of specialized law enforcement shotguns, the SPEEDFEED Pistol Grip features a unique angle to the plane of the shotgun. Recoil is kept to a minimum, allowing shot by shot control. The set comes with the sport forend and all necessary mounting hardware. |
|
• SPEEDFEED Pistol Grip Set for the Remington 870
|
Item # SF390 |
$54.95
$49.95
|
|
• SPEEDFEED Pistol Grip Set for the Winchester 1200
|
Item # SF392 |
$54.95
$49.95
|
|
• SPEEDFEED Pistol Grip Set for the Mossberg 500/590 (not 500A)
|
Item # SF394 |
$54.95
$49.95
|
|
|
|
|
SPEEDFEED 1 Magazine Stock Only
$0.00
[ Add to Cart]
|
|
|
SPEEDFEED III Tactical Magazine Stock Only |
|
|
• Winchester 1200/1300
|
Item # SF559 |
$99.95
$79.95
|
|
|
|
|
 |
Shot Gun Pistol Grip Stock |
This is the ultimate shotgun stock for hunters, law enforcement &competition shooters. It
reduces felt recoil to make follow-up shots faster and more accurate. Single-handed firing is also made easier. It
includes a 1" thick rubber recoil pad and a bottom mounted 1" sling swivels. All of these stocks (except Rem
870/1100/11-87) have a skeletonized stock to reduce weight. |
|
• -Black Rem. 870/1100/11-87
|
Item # CM010102 |
$102.95
|
|
• Black Winchester 1200/1300/1400
|
Item # CM030102 |
$69.95
|
|
• Black Ithica
|
Item # CM040102 |
$69.95
|
|
|
|
|
 |
Synthetic Conventional Stock with Adjustable Length |
These stocks allow the shooter to adjust the
length of pull from 13" to the length desired by adding 1/4", 3/4" or 1/2" spacers and appropriate length screws.
The stock ships with two 1/2" spacers and three sets of screws. It includes a bottom mounted 1" sling stud. These
stocks are NON-skeletonized |
|
• 1/2" Spacer
|
Item # CMX99001 |
$6.00
|
|
• Black Rem. 870
|
Item # CMX90002 |
$63.95
|
|
• Black Rem. 1100/11-87
|
Item # CMX90004 |
$63.95
|
|
• Black Beretta 1201FP
|
Item # CMX90007 |
$63.95
|
|
• Black Mossberg 500/600/500A/590
|
Item # CMX90008 |
$63.95
|
|
• Black Winchester 1200-1400
|
Item # CMX90012 |
$63.95
|
|
• Black Ithaca Model 37
|
Item # CMX90016 |
$63.95
|
|
• 1/4" Spacer
|
Item # CMX99003 |
$6.00
|
|
|
|
|
 |
Synthetic Pistol Grip Stock |
These stocks allow the shooter to adjust the
length of pull from 13" to the length desired by adding 1/4", 3/4" or 1/2" spacers and appropriate length screws.
The stock ships with two 1/2" spacers and three sets of screws. It includes a bottom mounted 1" sling stud. These
stocks are NON-skeletonized. Black Only. |
|
• Remington 870 Pistol Grip Stock
|
Item # CMXP9002 |
$73.95
|
|
• Black Rem. 1100/11-87
|
Item # CMXP9004 |
$73.95
|
|
• Black Mossberg 500/600/500A/590
|
Item # CMXP9008 |
$73.95
|
|
• Black Winchester 1200 & 1300, 1400
|
Item # CMXP9012 |
$73.95
|
|
• Black Super 90
|
Item # CMXP9015 |
$73.95
|
|
• Black Ithica Model 37
|
Item # CMXP9016 |
$73.95
|
|
|
|
|
 |
Top Folding Stock |
The rubber butt pad keeps it quiet and it will not scratch your gun. Manipulation of the stock
is simple. A thumb button unlocks the stock and it locks in both the folded & shooting positions. Fits 12 guage
standard frames. Stock doesn't include forend. Black Only. |
|
• Black Rem. 870
|
Item # CM010112 |
$102.95
|
|
• Black Mosseberg 500/600/590/500A
|
Item # CM020112 |
$102.95
|
|
• Black Winchester 1200/1300/1400
|
Item # CM030112 |
$102.95
|
|
|
|
|
|
|
Shotgun End Plate Sling Adapters |
Simply installs between the buttstock and receiver for convenient sling mounting. Available with slots for conventional web slings or loops for claw type clasp (such as Single Point Elastic Cord Sling on page 21). For Remington 870 or Mossberg 590. Right hand only |
|
• Shotgun End Plate Sling Adapter (Slot Style, Rem 870)
|
Item # MD562 |
$29.95
|
|
• Shotgun End Plate Sling Adapter (Slot Style, Moss 590)
|
Item # MD564 |
$29.95
|
|
• Shotgun End Plate Sling Adapter (Loop Style, Rem 870)
|
Item # MD566 |
$29.95
|
|
• Shotgun End Plate Sling Adapter (Loop Style, Moss 590)
|
Item # MD568 |
$29.95
|
|
|
|
|
 |
Remington Magazine Cap Sling Mounts |
Sling Loop (1.25"), Hook Loop. Our steel Sling Mount Magazine Caps for the Remington 870/1100/1187 replace the factory magazine caps and provide a forward sling attachment. No fitting required. Remington Shotguns only. |
|
• Remington Magazine Cap Sling Mount (Sling Loop 1.25")
|
Item # ME350 |
$39.95
|
|
• Remington Magazine Cap Sling Mount (Hook Loop)
|
Item # ME360 |
$39.95
|
|
|
|
|
 |
Receiver Mounted Sling Adapters
For Remington & Mossberg Shoguns
From MESA TACTICAL |
Our innovative sling mounts securely attach a sling directly to the shotgun receiver. The sling mount is free to rotate and a rubber gasket keeps the mount from marring the receiver finish. Our Hook Loop mount is perfect for tactical slings with a snap hook or clip hook. Our 1.25" Sling Loop mount is for standard slings to slide through. No fitting required and all hardware is included. Finished in mil-spec manganese phosphate. |
|
• Receiver Mounted Sling Adapter for Moss 500/590/835 (Sling Loop 1.25")
|
Item # ME260 |
$24.95
$19.95
|
|
• Receiver Mounted Sling Adapter for Moss 500/590/835 (Hook Loop)
|
Item # ME270 |
$24.95
$19.95
|
|
• Receiver Mounted Sling Adapter for Remington 870/1100/1187 (Sling Loop 1.25")
|
Item # ME330 |
$24.95
$19.95
|
|
• Receiver Mounted Sling Adapter for Remington 870/1100/1187 (Hook Loop)
|
Item # ME340 |
$24.95
$19.95
|
|
|
|
|
 |
Buttstock Shell Holder |
Elastic sleeve slips over rifle or shotgun stock. Elastic loops put shells in easy reach for hunting or target shooting. Rifle model holds nine rounds; shotgun model holds five. |
|
• Buttstock Shell Holder for Rifles
|
Item # 2220-0 |
$12.95
|
|
• Buttstock Shell Holder for Shotguns
|
Item # 2220-1 |
$12.95
|
|
|
|
|
 |
Tactical Shotgun Light Mount
Easily Attach a Light to Your Shotgun!! |
This rugged, one-piece metal mount clamps onto the extended magazine tube for secure mounting of 1” diameter lights such as the Surefire 6P, 9P, or any other light with a 1” diameter body. It fits 12 gauge shotguns with extended or large capacity 1” diameter magazine tubes such as those by Choate, Scattergun Tech, TacStar, and the factory magazine tube. (Note: Mossberg 590A1 & Benelli Super 90 use different mounts). Fits: Remington 870/1100/1187; Mossberg 590/500A; Winchester 1300 |
|
• Tactical Shotgun Light Mount for Rem/Moss/Win
|
Item # LM252 |
$39.95
|
|
• Tactical Shotgun Light Mount for Mos 590A1 Heavy BBL)
|
Item # LM253 |
$39.95
|
|
• Tactical Shotgun Light Mount for Benelli Super 90
|
Item # LM254 |
$39.95
|
|
|
|
|
|
