Recoil Buffers, Tools & Accessories

   
BUFFERtechlogo.jpg Buffer Technologies Recoil Buffers
Recoil Buffers protect your firearm from the shock caused by the metal on metal impact of the bolt or operation rod with the receiver. This impact causes felt recoil and muzzle jump, over time the metal will begin to change shape and even crack. Each buffer is made from shock absorbing polyurethane and acts as a cushion to absorb this shock. Buffers help maintain your weapon’s accuracy and extend it’s service life. Installation is simple and requires no special tools. Protect your investment while enjoying it! *Brief instructions are included.
TF429new.jpg
(A)M1A/M14 Buffer
The Recoil Buffer eliminates metal to metal contact of the operating rod to the front of the receiver, protecting the rod from excessive shock. Fits all manufacture M1A/M14 rifles.
Item # TF429
$14.95 		ORDER
HK91-buffer.jpg
(B) HK 91/93 Buffer
Installs in the buttstock and takes the pounding from the bolt carrier instead of your receiver and shoulder. Fits all fixed stock models.
Item # TF428
$19.95 		ORDER
TF440.jpg
(C)AR-15 Recoil Buffer
The AR-15 buffer absorbs a tremendous amount of energy and over time, becomes brittle. This long lasting, improved polyeurthene unit replaces the factory part. Installation is a snap. Simply drill a new hole for the roll pin and place on top of the buffer body.
Item # TF440
$9.95 		ORDER
TF433.jpg
(D)Browning Hi Power
Easily lides onto the recoil spring rod and ensures that your piece of the Browning legacy endures.
Item # TF433
$9.95 		ORDER
TF435new.jpg
(E) Mac 10
Replaces factory unit & allows the recoil spring to rest against the rear support plate, eliminating severe compression. Works with any caliber-Specify Mac 10.
Item # TF435
$6.95 		ORDER
TF424new.jpg
(F)Ruger® 10/22
Replaces the bolt stop pin and helps preserve the alloy receiver. Decelerates the bolt more gradually, allowing for quicker set up for the next shot.
Item # TF424
$9.95 		ORDER
TF429new.jpg
(G)FN/FAL
The FN buffer fits in the rear of the upper receiver preventing the bolt carrier from impacting the lower. It fits in all standard and Para rifles, both metric and inch pattern. Installs in less that a minute without tools.
Item # TF430
$14.95 		ORDER
TF427.jpg
(H) AK/Galil/Valmet
It slips onto the recoil spring guide and absorbs the shock generated by the bolt carrier. Delivers less felt recoil and enhanced rapid fire control.
Item # TF427
$14.95 		ORDER
TF426new.jpg
(I) SKS Buffer
Fits in the rear of the top cover. An indention in the buffer provides a secure resting spot for the spring guide, making assembly easier. Eliminates shock to receiver and scope. Fits all Chinese and Russian models.
Item # TF426
$9.95 		ORDER
TF431new.jpg
(J)Glock
Eliminates the metal slide from impacting the polymer frame by inserting on the spring guide rod. Installation is a breeze, and you'll feel the difference. Fits: 17, 17L, 18-24, 24C, 31 and 32.
Item # TF431
$9.95 		ORDER
TF432.jpg
(K)Colt 1911 & Copies
Recoil Buffers have been a mainstay of serious 1911 shooters for years, and are used by the country's best gunsmiths. Fits all 1911 guns including the Government, Commander, and Officers models. This amounts to inexpensive insurance for this classic performer! Package of 8.
Item # TF432
$9.95 		ORDER
TF425new.jpg
(L)Ruger® Mini 14/30
Fits onto recoil spring guide eliminating metal to metal pounding. You'll have less felt recoil, less action noise, and prolong your rifle's service life. Fits all series.
Item # TF425
$14.95 		ORDER
TF435new.jpg
(M)Mac 11
Replaces factory unit & allows the recoil spring to rest against the rear support plate, eliminating severe compression. Works with any caliber - Specify Mac 11.
Item # TF436
$6.95 		ORDER
TF434new.jpg
(N) Smith & Wesson Centerfire
Fits all centerfire models of third generation guns. Will not work in the Sigma series.
Item # TF434
$9.95 		ORDER
S&W Model 41 - Image Not Available
The Model 41 Buffer will fit on all barrel lengths of this pistol.
CZ75/85 Buffer - Image Not Available
Will fit all CZ75 and CZ85 pistols. There are many copies of the CZ75 and most will accept this buffer.
Item # TF438
$9.95 		ORDER
TF441.jpg
Beretta 92/96 Recoil Buffer Kit
Kit includes full-length, stainless steel guide rod and recoil-absorbing buffer. Drops fin for long-wearing protection.
Item # TF441
$24.95 		ORDER
TF441.jpg
Sig 220/226 Recoil Buffer Kit
Kit includes full-length, stainless steel guide rod and recoil-absorbing buffer. Drops in for long-wearing protection.
Item # TF442
$24.95 		ORDER
Tool_Bag.JPG
Ammo & Tool Pouch
This large military surplus tool bag made of heavy canvas with two large outer snap pockets. 6"x 12"x 6" with zipper/olive drab color.

• Olive Drab
Item # ASTB
$19.99 $14.95

• Black
Item # ASTB2
$19.99 $14.95
CHAPMANSETNEW.jpg
Chapman Screwdriver Set
Uniquely designed, quality set made specifically for the gunsmith and sportsman alike. At 5" x 6.5", this kit fits easily just about anywhere and with 27 pieces your sure to find the tool to do the job. MADE IN AMERICA!
Item # CH22
$34.95 $32.95 		ORDER
Brass Punch Set
Standard kit with two stainless steel punches, eight brass punches and two plastic punches in its own nifty little black carrying case that measures 4" x 8". This is a great set for just about anyone!
Item # MA22
$29.95 		ORDER
GK17.jpg
Grace USA 17 Piece Gun Smith Tool Set
This set of 17 essential tolls in a padded vinyl case is one that you will be proud to own. It’s made right, and made here (none of that sissy imported stuff for us!) There are eight custom hollow-ground screwdrivers perfect for scope & sight screws, plug screws and many others. Square shanked blades are hardened and heat tempered to R/C 52-56 and guaranteed not to twist or chip. Handles are tuned from solid Maine hardwood and smooth finished. There are 8 no-mar brass punches sizes machined from solid brass stock and beautifully finished. Punches: 1/6 , 3/32 , 1/8 , 5/32 , 3/16 , 7/32 , 1/4 , 5/15 . Our solid brass hammer is turned from 360 brass and hand polished. The seasoned hickory handle is then driven into the brass head and brass pinned. This is a set that could have easily been in your grandfather’s box!
Item # GR17
$107.95 $89.95 		ORDER
D955.jpg
Gun Cleaning Pad
Protects Your Table & Firearms from Scratches and Spilled Cleaning Fluids!
Clear bonded backing prevents soak thru. Non-woven fabric-facing is soft durable and very thirsty. Rounded corners for a finished look. Featuring Zorb-TechTM Anti-Flow Absorbency technology (absorbent yet waterproof). Keeps parts organized. Makes a great display mat. Folds up for compact, easy storage. Durable, stain resistant and washable. Perfect for rifles, shotguns, muzzleloaders, etc. Dimensions: 16" x 54"
Item # D955
$14.95 		ORDER

Recoil Buffers, Tools & Accessories